How our instant quote tool works

In the Models panel, click ADD FILES or drag STL files anywhere on the quote page. Upload one part or many at once — each up to 128 MB.

Every file becomes its own model card with thumbnail, specs, quantity stepper, live price, and add-to-cart control. Click a card to select it (blue outline + pencil icon) and open it in the 3D preview.

Clear all in the Models header removes every uploaded file from the list (it does not empty the cart). The bin on each card's right edge deletes that one upload.

Click a model card to select it. The active card gets a blue border and a small pencil beside the file name. Its mesh opens in the 3D preview with name, size and volume overlaid in the corner (and triangle count along the bottom edge).

In Print Options you set:

• Technology — currently FDM for most jobs.
• Material — strength, heat and finish trade-offs.
• Color — swatch picker with live preview tint on the model.
• Layer thickness — finer layers = smoother surface.
• Filling (infill) — how solid the inside is.
• Post production — optional finishing when available.

Printing several parts the same way? Click Apply these settings to all parts to copy material, colour, layer and infill to every upload. Quantities stay per-part.

If a part exceeds our build volume, a red Exceeds build volume · manual quote chip appears on the card and instant checkout is disabled for that part — use Request quote review instead.

Each model card has its own − / + quantity stepper. The large figure on the right is the line total for that part (inc GST); the grey line beneath is price per part. Both update as you change quantity or options.

Bulk discounts apply automatically as quantity rises — no coupon code. Typical tiers are 5+ (5% off), 10+ (10% off), 25+ (15% off) and 50+ (20% off) (exact tiers may vary; your tool shows the live table).

Tap Show bulk price under the stepper to expand the tier table on that card. The row for your current quantity is highlighted.

If you change quantity after a part is already in the cart, the green check reverts to the cart icon — tap it again to add the updated configuration.

The Cart column on the right is your running order. It is separate from the Models list — adding parts does not remove them from your uploads.

1. Configure a part in Print Options and set its quantity on the model card.
2. Add to cart using the cart icon on the card's right rail (top half). While adding, a spinner shows; when done, a green check confirms it is in the cart.
3. Repeat for each part, or use ADD ALL PARTS TO CART at the bottom of Models when every ready part should go in at once.
4. Review line items, shipping, setup fee and total in Cart, then CHECK OUT.

Two different remove actions:

• Clear all (Models header) — deletes uploaded files from the list.
• Clear cart (Cart header) — empties the WooCommerce cart but keeps your uploads so you can re-add with different options.
• Bin on the card rail (bottom half) — deletes that upload entirely (and removes it from cart if it was added).

Enter your postcode in the Shipping section to see carrier rates. Order notes (PO number, tolerances, end use…) sit above checkout.

Not ready to pay? After at least one item is in the cart, use Request quote review or Email me this quote (sign-in required). Every order is reviewed before printing.